In pictures: Czech sculptor creates 3D-printed floating house

The house is being printed from special concrete & is planned to float on the Vltava river

Published: June 20, 2020 13:13 AFP and compiled by Balaram Menon, Digital Content Editor

1 of 14

Workers check the 3D printing of the first-ever concrete house in Czech Republic, in Ceske Budejovice city. A Czech sculptor has teamed up with a group of architects to create a 3D-printed house prototype that could become a holiday home for the future. Image Credit: AFP

2 of 14

The house is being printed from special concrete in the southern Czech city of Ceske Budejovice and is planned to float on the Vltava river in Prague in August. Image Credit: AFP

3 of 14

"I dare say it's the first-ever floating 3D-printed building in the world," said sculptor Michal Trpak (pictured), the mastermind behind the project. Image Credit: AFP

4 of 14

The design of the house, which can be printed in two days, was inspired by a single-celled creature known as a protozoa, he says. Image Credit: AFP

5 of 14

As an added attraction, Trpak plans to turn the abode into a floating garden, with plants covering its roof and outside walls. The simple 43-square metre floor plan includes a living room with kitchen, a bedroom and bathroom. Above: Jachym Version, account manager of AMI Communications shows the visualisation of the 3D printing of the concrete house. Image Credit: AFP

6 of 14

"3D houses will adapt to the people or the countryside. The robot doesn't care about the shape of the curve," Trpak said to the hum of a mechanic hand with a nozzle patiently piling up layer after layer of concrete strips. Image Credit: AFP

7 of 14

"The house is intended as a leisure-time house to stand in the countryside, ideally for a couple or a small family," added Trpak, who drew inspiration from 3D-printed housing projects in the Netherlands. Image Credit: AFP

8 of 14

To finance the project, dubbed the "Protozoan", its creators have teamed up with a Czech building society. Image Credit: AFP

9 of 14

"This one is pretty expensive because it's a prototype and we needed many tests.... But the second generation should cost around three million (Czech) crowns $127,500) and the third generation may cost about half of that amount," Trpak said. Image Credit: AFP

10 of 14

When the robot is done, the concrete bedroom and bathroom modules will be attached to a wooden core with large windows and completed with a wooden roof. Image Credit: AFP

11 of 14

The house will then be transported to Prague, installed on a pontoon and displayed on the Vltava river in Prague's broader centre for two months. Image Credit: AFP

12 of 14

"We didn't have a plot of land to place it on, and anyway, to do that, you need a building permit and that takes up to two years" to secure, said Trpak. "But if you float it on a river, you only need consent from the navigation body, which is much faster." Image Credit: AFP

13 of 14

Trpak said the construction had not been trouble-free as the concrete is sensitive to temperature changes. Image Credit: AFP

14 of 14

"When it's very warm it hardens faster, when it's cold it hardens more slowly so now we're adding warm water from a boiler," he added as the weather changed for the worse. "We keep researching and developing. It's a process of trial and error." Image Credit: AFP

Photos Business

In pictures: Czech sculptor creates 3D-printed floating house

More From Photos

UK’s Starmer rules out austerity as Labour conference opens

Building collapse near Naples kills two young siblings

Macron names a new French government as budget battle looms

Man arrested in Italy over 1977 Australian double murder

GULFNEWS SECTIONS

Trending

In pictures: Czech sculptor creates 3D-printed floating house

More From Photos

UK’s Starmer rules out austerity as Labour conference opens

Building collapse near Naples kills two young siblings

Macron names a new French government as budget battle looms

Man arrested in Italy over 1977 Australian double murder

GULFNEWS SECTIONS